The installation principle and maintenance parts of the cylindrical grinder.
1. When the cylindrical grinder is transported to the operation workshop, it should not be placed outdoors for a long time, as sunlight may affect the accuracy.
2. When loading and unloading equipment, copper cables with a diameter of 10mm or more should be used to lift through the hook or unloaded with a stacker crane. Attention should be paid to the center of gravity position to prevent tipping.
3. If rust proof oil is found on the outer cylindrical grinder, use a soft cloth dipped in kerosene to wipe it off.
4. After each homework is completed, things, fixtures, and measuring tools should be cleaned, and the bed should also be cleaned. The surrounding environment should be cleaned to maintain cleanliness.
5. Check the oil level to see if it needs to be increased, and if so, increase it promptly.
6. Carefully inspect the cooling pump to see if there are any issues.
7. Check the screws and tighten them promptly if they are loose.