1、 The speed regulation range should be wide, and it is required to achieve stepless speed regulation within the range of 0.05-4m/min. The motion should be smooth, with no crawling at low speeds and no impact at high speeds.
2、 Within the above speed range, it can automatically change direction, with a smooth switching process, minimal impact, quick start and stop, and high switching accuracy.
3、 The worktable should have a certain amount of dwell time before moving forward at the end of the stroke to prevent the size of the T-piece from being too large due to short grinding time, and the dwell time can be adjusted within 0-5s.
4、 The workbench can perform micro shaking, with a shaking frequency of 60-180 times/min. If the external grinder is equipped with an internal grinding head accessory, it can also grind inner holes and taper holes.