The compact structure, beautiful appearance, flexible adjustment, and easy operation of CNC end face cylindrical grinding machine are the characteristics that beginners should pay attention to. But what are the specific steps when grinding?
Grind the main rear blade surface, while grinding out the main deviation angle and main rear angle; Grind the secondary rake angle and secondary rake angle simultaneously on the blade surface after grinding; Grind the back and simultaneously grind the front corner; Grind each blade surface and tip. The posture and method of the grinding tool are to stand in front of the CNC end face cylindrical grinder to prevent fragments from flying out and injuring people when it breaks. Release the gap between holding the knife with both hands and clamp the waist with both elbows to reduce the vibration during sharpening. When sharpening, the cutting tool should be placed in the middle. When the cutting tool is separated, it should be lifted upwards to avoid damaging the sharpened blade.
In the process of grinding the cutting tool on the CNC end face cylindrical grinder, personal issues should be taken into account, and the machine tool should be checked in advance for cracks, whether the shaft nut is tightened, and other details.