The grinding wheel holder is equipped with a grinding wheel spindle for external cylindrical grinding, and its bearing is a three tile dynamic pressure bearing. The forward, backward, and speed of the grinding wheel rack are controlled by the system and directly driven by servo motors and ball screws. The grinding machine requires frequent adjustment and maintenance. The grinding wheel holder can rotate, and the angle of rotation can be read from the scale plate.
Grinding wheels are generally installed with flanges. The flange base, flange cover, gasket, hexagon socket screw, and other components of the flange are included.
Installation requirements:
(1) There are no major issues with the installation base of the grinding wheel.
(2) The axis of the grinding wheel should not be skewed or eccentric relative to the axis of the flange.
(3) When installing the grinding wheel, thick paper should generally be used as a liner to ensure that the pressure of the grinding wheel during installation and compression can be evenly distributed across the entire end face of the grinding wheel.
Precautions for grinding wheels:
(1) When adjusting the balance frame, the adjusting screw should be adjusted and the rotation action should not be too large.
(2) After placing the grinding wheel and balance spindle on the balance frame, do not let the grinding wheel slide off the balance frame and damage the grinding wheel.
(3) When rotating the grinding wheel, it should be slightly and slowly, and excessive force should not be applied.
(4) The balance block also needs to be moved.
(5) Pay attention to the balance axis being perpendicular to the balance cylinder guide rail.