The CNC end face cylindrical grinder is mainly used for grinding the end face, outer circle, and conical surface of batch shaft workpieces, and is the main equipment in industries such as automotive engines. The grinding method of the machine tool is as follows:
1. End face grinding: Remove the rotating cover of the working spindle head, replace it with a three jaw or four jaw chuck, change the position of the positioning tip to rotate the chuck, and fix it at a 90 ° position to perform end face grinding.
2. Shoulder grinding: When the outer diameter of the workpiece and the shoulder of the CNC end face cylindrical grinder need to be ground in a single operation, the workpiece is supported by two centers and the grinding wheel is modified to the right of the grinding wheel head and rotated by one angle to grind.
3. Slope grinding: The workpiece can be supported by a chuck or two centers, and both the worktable and grinding wheel head can rotate and be easily adjusted.
4. Inner diameter grinding: The inner diameter grinding accessory can grind the inner diameter by simply pulling down the inner diameter grinding spindle and fixing it in the grinding position.
5. Diameter grinding: When producing small quantities of CNC end face cylindrical grinders, automatic feeding combined with a spark free timer can achieve good grinding quality. When producing in large quantities, the two-stage automatic feed and two-stage measuring device can provide better output and grinding effect.
6. Horizontal Grinding: The automatic intermittent feed and pressure driven worktable ensure good horizontal grinding of the workpiece.