Machine model		MS-009A type
Grinding hole diameter		F45-W160mm
Grinding hole depth		750mm
Worktable travel		1050mm
Tuming angle of the headstock		4°
Workpiece maximum installation length		1100mm
Center frame workpiece diameter adjustment range		F45-F200mm
Workpiece speed		40-600r/min
Wheel speed		18000,12000,9000,5000r/min
Total power of machine		6KW
Weight of machine		6000kg
Dimensions (L×W×H)		5120×1700×1700mm
Work accuracy (Inner hole of standard specimen) F80×600mm,45#钢)	Circular degree(mm)	0.005mm
	Diameter consistency(mm)	0.012mm
	Roughness degree(μm)	Ra0.63μm

Purpose and operating procedures

The main content of CNC internal grinding machine, today we will explain its main uses, but in the form of a question and answer. Afterwards, we will focus on explaining the operating procedures of automatic internal grinding machines, so that everyone can not only understand CNC internal grinding machines, but also learn about this type of grinding machine, thereby enriching our knowledge and increasing our knowledge. Without further ado, let me elaborate on the specific content below.
What is suitable for CNC internal grinding machine? So, what is its purpose?
Answer: The CNC internal grinder is mainly used for processing inner circular holes, inner conical holes, and smaller end faces.
The operating procedures for automatic internal grinding machines mainly include:
(1) The relevant operators should be familiar with and understand the machinery and equipment, and know how to operate and use the equipment.
(2) The equipment is strictly prohibited from being used beyond its performance limit to avoid damage to the equipment.
(3) Before starting the equipment, necessary inspections should be carried out, including grinding wheels, lubrication, oil circuits, oil levels, etc. If there are any problems, they should be dealt with in a timely manner.
(4) Before starting the electric spindle, it is necessary to first turn on the cooling water pump, check whether the oil mist lubrication is normal, and whether there are any abnormalities in the electric spindle. If there are no abnormalities, the electric spindle and workpiece axis can be started.
(5) Before starting the equipment, check if the protective cover and lid are properly placed and if there are no issues.
(6) If any abnormality occurs during the operation of the equipment, it should be stopped immediately for inspection.
(7) The coolant should be kept clean and regularly replaced.
(8) After the work is completed, cut off the power supply of the equipment.