1. The feed and correction of the machine tool are executed by two non interfering transmission mechanisms, and the feed system has a fixed range grinding function, using manual or hydraulic feed methods;
2. The machine tool is equipped with a quick jump mechanism, so there is no need to manually adjust the tool after exiting the grinding wheel for measurement or correction.
3. The workbench is equipped with a hydraulic switch valve to ensure safety during loading and unloading operations;
4. When placing special orders for machine tools, they can be equipped with a high-speed grinding wheel shaft with a speed of 18000 revolutions per minute, suitable for grinding holes ranging from 20 to 50mm;
5. The machine tool does not have an end grinding device on the top of the headboard, and there is a reliable hydraulic interlock between the end grinding rotation and the longitudinal movement of the worktable.

Machine model			M2110C	MD2110C
Bore diameter to ground			F6-L100	F6-L100
Max.grinding depth			150	150
Swing of workpiece		Within guard	F260	F260
		Without guard	F480	F480
Swiveling angle of workhead housing(°)			30	30
Work speed(r/min)			180-500 4steps	180-500 4steps
Wheel speed(r/min)			10000, 24000	10000, 24000
Total power(kw)			4.1	4.1
Work motor power(kw)			0.45/0.75	0.45/0.75
Wheel motor power(kw)			2.2	2.2
Overall dimensions(mm)			2363×1260×1300	2363×1260×1300
Machine weight(kg)			2000	2100
Machine accuracy	Roundness(μm)		2.5	2.5
	Cyindricity(μm)		4	4
	Roughness(μm)		Ra0.63	Ra0.63
	Roughness of endface(μm)		/	Ra0.8