1. What measures can be taken to make the dimensions of a CNC cylindrical grinder fluctuate?
How to make the dimensions of CNC cylindrical grinders fluctuate? To achieve this goal, we can take measures, in detail, including:
Measure 1: Ensure that the workpiece and fixture are sturdy and reliable during rotation.
Measure 2: For feed fragments on the grinder, it is necessary to frequently use a dial gauge holder to stop reflection and confirmation to ensure appropriate clearance, and the feed data should be the same.
Measure 3: On the grinding wheel of the grinder, it is necessary to ensure that it can meet the grinding requirements and prevent the presentation of results. In addition, it is necessary to prevent the grinding wheel from displaying its own performance, so as not to affect its use.
2. If a workpiece is ground with a CNC cylindrical grinder and it shows a taper, how should it be handled?
If, after grinding the workpiece with a CNC cylindrical grinder, the workpiece shows a taper, then it is possible to combine its structure to stop adjusting and eliminate this phenomenon. If there is a headstock on the clamped workpiece, it can also be stopped by a rotating mechanism.
3. Can there be some detailed requirements for programming CNC cylindrical grinding machines?
Programming tasks have some requirements for operators, at least they need to be familiar with and understand all aspects of the grinder, and at the same time know how the machine equipment functions. In addition, on CNC cylindrical grinding machines, the consumer manufacturers will have some pre-set macro sequences, so when using them, they should know how to correct the parameters correctly in order to achieve the expected application purpose.