1. The grinding wheel spindle bearing is a five piece dynamic pressure sliding bearing with high load-bearing capacity and stiffness;
2. The main shaft bearing of the guide wheel is a 1:30 integral sliding bearing with high load-bearing capacity and precision;
3. The guide wheel frame can rotate at a small angle in the horizontal direction. When grinding workpieces with small taper angles, the grinding wheel does not have to be tapered, which improves the utilization rate of the grinding wheel and reduces the dressing time;
4. The variable speed of the guide wheel adopts AC variable frequency speed regulation, which can achieve infinite adjustment;
5. The sand and guide wheel trimmers are both driven back and forth by hydraulic transmission, with infinite adjustment;
6. Equipped with an automatic cutting and grinding device, capable of semi-automatic cyclic operation;
7. The grinding wheel spindle can be equipped with a ceramic spindle.

This machine tool can be used for centerless through grinding of various cylindrical parts, annular parts, and long bar materials. It is also suitable for cutting in and grinding of cones with a circular dimension less than 1:20 and various formed rotary parts. It is suitable for batch and mass production needs.

1. Thru-feed
(1) Grinding diameter	5-50mm
(2) Grinding length	120mm
2. Plunge feed
(1) Grinding diameter	7-50mm
(2) Grinding length	120mm
3. Gri.wheel spec	P400×150×203
4. Reg.wheel spec	PSA300×150×127
5. Gri.wheel speed	1668r/min
6. Reg.wheel speed
(1) Working time	20-200r/min (stepless)
(2) Repair time	200r/min
7. Reg.wheel swivel angle
(1) Invertical plane	-2°~5°
(2) In horizontal plane	-10°-3°
8. Feed rate of handwheel perdivision	0.002mm
9. Dressing device graduation	0.01mm
10. Height from centerline of gri.wheel&reg.wheel to workrest	220mm
11. Toal power of machine	13.78KW
(1) Gri.wheel electomoto	11KW
(2) Reg.wheel electomotor	1.5KW
12. Power supply	Three phase 380V50HZ
13. Overall dimensions	1920×1681×1479mm
14. Machine weight	About 2800Kg
15. Machining accuracy
Roundness	0.002mm
Cylindricity	0.003mm
Surface roughness ra	Ra0.32μm