Handling of faults in CNC cylindrical grinding machines.
1、 Can there be many reasons for a malfunction in a CNC cylindrical grinder?
On a CNC cylindrical grinder, a malfunction can have many causes and involve various aspects, such as mechanical, electrical, and control systems. So when we encounter it in practical work, we should list all the relevant factors and analyze and investigate them one by one, so as to find the cause and solve it.
2、 What is the reason for the dimensional deviation of the workpiece after machining on a CNC cylindrical grinder?
If there is a deviation in the size of the workpiece after machining with a CNC cylindrical grinder, it may be due to a problem with the static or dynamic balance of the grinding wheel in the grinder, resulting in excessive vibration and subsequent deviation in the size of the workpiece. Additionally, it is possible that the issue was caused by problems with the grinding machine itself.
3、 Is the grinding wheel in a CNC cylindrical grinder represented by rotational speed or linear velocity? In addition, what does FANUC programming for this grinder specifically refer to?
The grinding wheel in a CNC cylindrical grinder is generally represented by linear velocity rather than rotational speed. As for its specific size, it is 40-60m/s.
The FANUC programming in CNC cylindrical grinders is specifically designed to enable the entire machining process from rough machining to precision machining of the workpiece in its composite fixed cycle after the workpiece contour is fixed. And in terms of program, it can be further simplified to increase the work efficiency of the grinder.