In order to better ensure the development and functionality of the CNC cylindrical grinder after processing, it is necessary to timely and effectively inspect the grinding wheel, protective cover, electrical switch and other components to check whether the CNC cylindrical grinder is complete and intact.
The oil level in the oil tank and the water level in the cooling water tank of the CNC cylindrical grinder need to be checked in a timely manner to see if they are sufficient. If they are not sufficient, they need to be added in a timely manner. During the processing of the equipment, the grinding wheel of the CNC cylindrical grinder needs to be used for its dressing work and balance experiments.
After the above work is completed and there are no problems during inspection, the CNC internal grinder grinding wheel can be put into use. When dressing the grinding wheel in the equipment, its sharp diamond needs to be used for timely dressing, and its coolant needs to be used, which is an essential step.
The relative position between the grinding tool axis and the centerline of the spindle in a CNC cylindrical grinder needs to be adjusted in a timely manner. After the equipment is adjusted, its nuts need to be used for fastening. In fact, the equipment is a common type of grinder.