Discussion on CNC cylindrical grinding machine.
There are also many types of cylindrical grinders, but today's lecture is about one of them, which is the CNC cylindrical grinder. It is divided into three parts for easy understanding and mastery.
1. Abnormal dimensional changes in CNC cylindrical grinding machine.
The problem with the grinder may be caused by loose components or damage. At this point, targeted inspections should be conducted to take measures to successfully resolve the issue.
2. Set reference points.
If setting reference points on a CNC cylindrical grinder, it is mainly based on the product's CNC system manual. Because different CNC systems have different operations, the settings are also different. Some buttons can be used, while others require modifying parameter values.
3. Tool alignment for CNC crankshaft cylindrical grinding machine.
The actual operation is to first separate the grinding wheel from the workpiece by a distance, usually 2-3mm. Then run the grinding program and simultaneously use the handwheel offset function to feed the grinding wheel shaft. When Mars appears, it means that the knife pairing has been successful. At this point, record the offset position of the handwheel and stack it onto the offset position of the workpiece coordinate system. Then, run it again to the desired degree.