1. The grinding wheel spindle bearing adopts a long five piece hydraulic dynamic pressure oil film bearing, which has a large load-bearing capacity, good rigidity, and smooth rotation;
2. The working speed of the guide wheel adopts an exchange gear with step variable speed, using an AC motor, which has a hard characteristic and is not easy to reverse drag;
3. The guide wheel can rotate at a small angle in a horizontal plane, and when grinding conical parts with a small taper, the grinding wheel does not need to be tapered;
4. The longitudinal movement of both the grinding wheel dresser and the guide wheel dresser is driven by hydraulic transmission, with uniform speed;
5. The imitation guide rails of the two refurbishers adopt double V-shaped steel ball rolling guide rails, which are sensitive to imitation, have no gaps, high precision, and long service life;
6. The feed skateboard adopts a needle roller guide rail, which is sensitive to movement, has high feed accuracy, and has a long service life;
7. The cooling system adopts a large water tank, which ensures sufficient cooling water, fast and clean heat dissipation, and is conducive to improving grinding efficiency, accuracy, and roughness;
8. The grinding wheel spindle can be equipped with a ceramic spindle.

1. Cutting in grinding
(1) Grinding diameter	10~150mm
(2) Grinding length	190mm
2. Through grinding
(1) Grinding diameter	10~150mm
(2) Grinding length	250mm
3. Gri.wheel spec	P600×200×305mm
4. Reg.wheel max.spec	PDA350×200X203mm
5. Gri.wheel speed(2 types)	1115,1340r/min
6. Reg.wheel speed
(1) Working speed (8 types)	8,13,15,20,25,32,38,63r/min
(2) Adjust the rotational speed	300r/min
7. Reg.wheel swivel angle
(1) Invertical plane	-2°~+5°
(2) In horizontal plane	0°~+3°
8. Feed amount per rotation of the feed handwheel	1.5mm
9. Feed handwheel feed rate per grid	0.01mm
10. Micro feed per hole feed rate	0.005mm
11. Cut in rapid movement (handle swing 1200)	0.5mm
12. Feed rate per unit rotation of the trimmer dial	0.015mm
13. Connect the center line of the two sand guide wheels to the height of the bottom surface of the bracket	285mm
14. Cooling pump flow rate	100L/min
15. Toaf power of machine	24.305K~r
(1) Grinding wheel motor	22KW
(2) Guide wheel motor	1.5KW
(3) Cooling pump motor	0.25KW
(4) Lubrication pump motor	0.125KW
(5) Hydraulic pump motor	0.25KW
(6) Magnetic separator motor	0.18KW
16. Machine tool power supply connection	3N~50HZ    380V
17. Overall size (Length x Width x Height)	2650×1500×1800mm
18. Net weight	About 7000Kg
19. Machining accuracy
Roundness	0.002mm
Cylindricity	0.003mm
Roughness	Ra0.32μm